Повышение экологичности технологических жидкостей, применяемых для бурения скважин

Лаврентиади, Ю.С.; Леушева, Е.Л.

doi:10.15593/2712-8008/2023.1.5

Повышение экологичности технологических жидкостей, применяемых для бурения скважин

Ю.С. Лаврентиади, Е.Л. Леушева

Сведения об авторах

Ю.С. Лаврентиади
Санкт-Петербургский горный университет, Санкт-Петербург, Россия
Е.Л. Леушева
Санкт-Петербургский горный университет, Санкт-Петербург, Россия

https://doi.org/10.15593/2712-8008/2023.1.5

Важным аспектом бурения углеводородов является использование буровых растворов, которые удаляют буровой шлам и стабилизируют ствол скважины, обеспечивая лучшую фильтрацию. Свойства буровых растворов важны для успеха любой буровой операции. Жидкости изначально были разработаны для обеспечения возможности и экономичности вращательного бурения подземных пластов. Кроме того, буровые растворы предназначены для образования фильтровальной корки, которая в основном предназначена для уменьшения потерь фильтрата в пласт, является тонкой и удерживает буровой раствор в стволе скважины. Одной из наиболее важных функций буровых растворов является сведение к минимуму количества фильтрата бурового раствора, поступающего в углеводородсодержащий пласт, что может привести к повреждению пласта из-за изменения смачиваемости породы, миграции мелких частиц, закупорки бурового раствора твердыми частицами и несовместимости с пластовой водой. Для стабилизации этих свойств в буровые растворы применяют ряд добавок, обеспечивающих удовлетворительные реологические и фильтрационные свойства жидкости. Однако обычно используемые добавки опасны для окружающей среды; при утилизации буровых растворов после буровых работ они вместе с буровым шламом и добавками сбрасываются в водоемы и вызывают нежелательное загрязнение. Следовательно, эти добавки следует заменить добавками, которые не наносят вреда окружающей среде и обеспечивают превосходные характеристики. В связи с этим биоразлагаемые добавки необходимы для будущих исследований. В обзорной статье представлено исследование роли различных биоотходов в качестве потенциальных добавок для использования в буровых растворах на водной основе. Рассмотрено использование наноматериалов, полученных из отходов, а также проведены реологические и фильтрационные исследования буровых растворов на водной основе, чтобы оценить влияние отходов в качестве добавок на характеристики буровых растворов.

Ключевые слова

буровые промывочные жидкостибуровые растворы«зеленые добавки»биоотходыэкологически чистые добавкисвойства бурового растворарастворы на водной основеплотность бурового растворафильтрация растворареологические параметры

Increasing the Environmental Friendly of Process Fluids Used for Well Drilling

An important aspect of hydrocarbon drilling is the use of drilling fluids that remove cuttings and stabilize the wellbore, providing better filtration. The properties of drilling fluids are essential to the success of any drilling operation. Fluids were originally developed to enable and cost effectively rotary drilling in subterranean formations. In addition, drilling fluids were designed to form a filter cake, which was primarily designed to reduce filtrate loss to the formation, was thin, and retained the drilling fluid in the wellbore. One of the most important functions of drilling fluids is to minimize the amount of drilling fluid filtrate entering a hydrocarbon containing formation, which can cause damage to the formation due to changes in rock wettability, fines migration, mud plugging with solids, and formation water incompatibility. To stabilize these properties, a number of additives are used in drilling fluids to ensure satisfactory rheological and filtration properties of the fluid. However, the commonly used additives are hazardous to the environment: when drilling fluids are disposed of after drilling operations, they, together with drill cuttings and additives, are discharged into water bodies and cause unwanted pollution. Therefore, these additives should be replaced with additives that are environmentally friendly and provide superior performance. In this regard, biodegradable additives are needed for future research. The review article presents an investigation into the role of various biowastes as potential additives for use in water-based drilling fluids. The use of waste-derived nanomaterial was considered, and rheological and filtration studies of water-based drilling fluids were carried out to evaluate the effect of waste additives on the performance of drilling fluids.

Keywords

drilling washing fluidsdrilling fluidsgreen additivesbiowasteenvironmentally friendly additivesdrilling fluid propertieswater-based fluidsdrilling fluid densityfluid filtrationrheological parameters

Литература

1.Нуцкова М.В., Рудяева Е.Ю. Обоснование и разработка технико-технологических решений для повышения эффективности бурения скважин в условиях поглощения промывочной жидкости // Недропользование. – 2018. – Т. 17, № 2. – С. 104–114. DOI: 10.15593/2224-9923/2018.2.1 Scholar
2.Литвиненко В.С., Николаев Н.И. Технологические жидкости для повышения эффективности строительства и эксплуатации нефтяных и газовых скважин // Записки Горного института. – 2011. – Т. 194. – С. 84. Scholar
3.Малышкин М.М. Экологизация технологии бурении скважин // Записки Горного института. – 2013. – Т. 203. – С. 63. Scholar
4.Малышкин М.М. Снижение экологической опасности при ведении буровых работ // Записки Горного института. – 2014. – Т. 207. – С. 186. Scholar
5.Николаев Н.И., Леушева Е.Л. Разработка составов промывочных жидкостей для повышения эффективности бурения твердых горных пород // Записки Горного института. – 2016. – Т. 219. – С. 412. DOI: 10.18454/pmi.2016.3.412 Scholar
6.Яковлев А.М. Значение смазывающих добавок при алмазном бурении // Записки Горного института. – 1976. – Т. 71(2). – С. 80. Scholar
7.Safety and security of oil and gas pipeline transportation: A systematic analysis of research trends and future needs using WoS / C. Chen, C. Li, G. Reniers, F. Yang // J. Clean. Prod. – 2021. – Vol. 279. – P. 123583. DOI: 10.1016/j.jclepro.2020.123583 Scholar
8.Effect of a novel clay/silica nanocomposite on water-based drilling fluids: Improvements in rheological and filtration properties / G. Cheraghian, Q. Wu, M. Mostofi, M.-C. Li, M. Afrand, J.S. Sangwai // Colloids Surf. A. – 2018. – Vol. 555. – P. 339–350. DOI: 10.1016/j.colsurfa.2018.06.072 Scholar
9.An investigation on the effects of silica and copper oxide nanoparticles on rheological and fluid loss property of drilling fluids / S. Medhi, S. Chowdhury, D.K. Gupta, A. Mazumdar // J. Pet. Explor. Prod. Technol. – 2020. – Vol. 10. – P. 91–101. DOI: 10.1007/s13202-019-0721-y Scholar
10.Zheng Y., Amiri A., Polycarpou A.A. Enhancements in the tribological performance of environmentally friendly water-based drilling fluids using additives // Appl. Surf. Sci. – 2020. – Vol. 527. – P. 146822. DOI: 10.1007/s13202-019-0721-y Scholar
11.Effects of carbon ash on rheological properties of water-based drilling fluids / X. Meng, Y. Zhang, F. Zhou, P.K. Chu // J. Pet. Sci. Eng. – 2012. – Vol. 100. – P. 1–8. DOI: 10.1016/j.petrol.2012.11.011 Scholar
12.Synthesis of a novel environment-friendly filtration reducer and its application in water-based drilling fluids / X. Chang, J. Sun, Z. Xu, K. Lv, Z. Dai, F. Zhang, X. Huang, J. Liu // Colloids Surf. A. – 2019. – Vol. 568. – P. 284–293. DOI: 10.1016/j.colsurfa.2019.01.055 Scholar
13.Improvement of rheological and filtration characteristics of water-based drilling fluids using naturally derived henna leaf and hibiscus leaf extracts / A.R. Ismail, N.M. Mohd, N.F. Basir, J.O. Oseh, I. Ismail, S.O. Blkoor // J. Pet. Explor. Prod. Technol. – 2020. – Vol. 10. – P.1 3541–3556. DOI: 10.1007/s13202-020-01007-y Scholar
14.Testing carrageenans with different chemical structures for water-based drilling fluid application / V. de Oliveira, K. dos Santos Alves, A. da Silva- Junior, R. Araújo, R. Balaban, L. Hilliou // J. Mol. Liq. – 2020. – Vol. 299. – P. 112139. DOI: 10.1016/j.molliq.2019.112139 Scholar
15.Establishing a practical method to accurately determine and manage wellbore thermal behavior in high-temperature drilling / M. Yang, D. Luo, Y. Chen, G. Li, D. Tang, Y. Meng // Appl. Energy. – 2019. – Vol. 238. – P. 1471–1483. DOI: 10.1016/j.apenergy.2019.01.164 Scholar
16.Ahmad H.M., Kamal M.S., Al-Harthi M.A. High molecular weight copolymers as rheology modifier and fluid loss additive for water-based drilling fluids // J. Mol. Liq. – 2018. – Vol. 252. – P. 133–143. DOI: 10.1016/j.molliq.2017.12.135 Scholar
17.An accurate model to predict drilling fluid density at wellbore conditions / M.A. Ahmadi, S.R. Shadizadeh, K. Shah, A. Bahadori // Egypt. J. Pet. – 2018. – Vol. 27. – P. 1–10. DOI: 10.1016/j.ejpe.2016.12.002 Scholar
18.Elkatatny S. Enhancing the rheological properties of water-based drilling fluid using micronized starch // Arab. J. Sci. Eng. – 2019. – Vol. 44. – P. 5433–5442. DOI: 10.1007/s13369-019-03720-1 Scholar
19.A Combined Barite-Ilmenite Weighting Material to Prevent Barite Sag in Water-Based Drilling Fluid / S. Basfar, A. Mohamed, S. Elkatatny, A. Al-Majed // Materials. – 2019. – Vol. 12. – P. 1945. DOI: 10.3390/ma12121945 Scholar
20.Experimental investigation of the effect of henna leaf extracts on cuttings transportation in highly deviated and horizontal wells / J.O. Oseh, M.M. Norrdin, F. Farooqi, R.A. Ismail, I. Ismail, A.O. Gbadamosi, A.J. Agi // J. Pet. Explor. Prod. Technol. – 2019. – Vol. 9. – P. 2387–2404. DOI: 10.1007/s13202-019-0631-z Scholar
21.Optimizing the gel strength of water-based drilling fluid using clays for drilling horizontal and multi-lateral wells / F. Alakbari, S. Elkatatny, M.S. Kamal, M. Mahmoud // SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition; OnePetro: Kuala Lumpur, Malaysia. – 2018. DOI: 10.3933/applreol-28-43606 Scholar
22.Prevention of barite sag in water-based drilling fluids by a urea-based additive for drilling deep formations / A. Mohamed, S. Al-Afnan, S. Elkatatny, I. Hussein // Sustainability. – 2020. – Vol. 12. – P. 2719. DOI: 10.3390/su12072719 Scholar
23.Novriansyah A. Experimental analysis of cassava starch as a fluid loss control agent on drilling mud // Mater. Today Proc. – 2021. – Vol. 39. – P. 1094– 1098. DOI: 10.1016/j.matpr.2020.07.189 Scholar
24.Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of water-based drilling fluid / P. Dejtaradon, H. Hamidi, M.H. Chuks, D. Wilkinson, R. Rafati // Colloids Surf. A. – 2019. – Vol. 570. – P. 354–367. DOI: 10.3390/en13133417 Scholar
25.Nanomaterial-based drilling fluids for exploitation of unconventional reservoirs: A review / M. Ali, H.H. Jarni, A. Aftab, A.R. Ismail, N.M.C. Saady, M.F. Sahito, A. Keshavarz, S. Iglauer, M. Sarmadivaleh // Energies. – 2020. – Vol. 13. – P. 3417. DOI: 10.3390/en13133417 Scholar
26.Bologna M., Aquino G. Deforestation and world population sustainability: A quantitative analysis // Sci. Rep. – 2020. – Vol. 10. – P. 7631. DOI: 10.1038/s41598-020-63657-6 Scholar
27.E-waste management and its effects on the environment and human health / R. Rautela, S. Arya, S. Vishwakarma, J. Lee, K.-H. Kim, S. Kumar // Sci. Total Environ. – 2021. – Vol. 773. – P. 145623. DOI: 10.1016/j.scitotenv.2021.145623 Scholar
28.Castillo-Giménez J., Montañés A., Picazo-Tadeo A.J. Performance and convergence in municipal waste treatment in the European Union // Waste Manag. – 2019. – Vol. 85. – P. 222–231. DOI: 10.1016/j.wasman.2018.12.025 Scholar
29.Demirbas A. Waste management, waste resource facilities and waste conversion processes // Energy Convers. Manag. – 2011. – Vol. 52. – P. 1280–1287. DOI: 10.1016/j.enconman.2010.09.025 Scholar
30.Environmental friendly drilling fluid additives: Can food waste products be used as thinners and fluid loss control agents for drilling fluid? / A.T.T. Al- Hameedi, H.H. Alkinani, S. Dunn-Norman, N.A. Alashwak, A.F. Alshammari, M.M. Alkhamis, H.W. Albazzaz, R.A. Mutar, M.T. Alsaba // SPE Symposium: Asia Pacific Health, Safety, Security, Environment and Social Responsibility; OnePetro: Kuala Lumpur, Malaysia, 2019. DOI: 10.2118/195410-MS Scholar
31.A comprehensive investigation on the performance of durian rind as a lost circulation material in water-based drilling mud / N.F.F. Majid, A. Katende, I. Ismail, F. Sagala, N.M. Sharif, M.A.C. Yunus // Petroleum. – 2019. – Vol. 5. – P. 285–294. DOI: 10.1016/j.petl.2018.10.004 Scholar
32.Ghayedi A., Khosravi A. Laboratory investigation of the effect of GO-ZnO nanocomposite on drilling fluid properties and its potential on H2S removal in oil reservoirs // J. Pet. Sci. Eng. – 2020. – Vol. 184. – P. 106684. DOI: 10.1016/j.petrol.2019.106684 Scholar
33.A novel field applicable mud formula with enhanced fluid loss properties in high pressure-high temperature well condition containing pistachio shell powder / S. Davoodi, A.R. SA, S. Jamshidi, A.F. Jahromi // J. Pet. Sci. Eng. – 2018. – Vol. 162. – P. 378–385. DOI: 10.1016/j.petrol.2017.12.059 Scholar
34.Hossain M.E., Wajheeddin M. The use of grass as an environmentally friendly additive in water-based drilling fluids // Pet. Sci. – 2016. – Vol. 13. – P. 292–303. DOI: 10.1007/s12182-016-0083-8 Scholar
35.Azizi A., Ibrahim M.S.N., Hamid K.H.K., Sauki A., Ghazali N.A., Mohd T.A.T. Agarwood waste as a new fluid loss control agent in water-based drilling fluid // Int. J. Sci. Eng. – 2013. – Vol. 5. – P. 101–105. DOI: 10.12777/ijse.5.2.101-105 Scholar
36.Iscan A., Kok M. Effects of walnut shells on the rheological properties of water-based drilling fluids // Energy Sources Part A. – 2007. – Vol. 29. – P. 1061–1068. DOI: 10.1080/00908310600713982 Scholar
37.Alcheikh I., Ghosh B. A comprehensive review on the advancement of non- damaging drilling fluids // Int. J. Petrochem. Res. – 2017. – Vol. 1. – P. 61–72. DOI: 10.18689/ijpr-1000111 Scholar
38.Thermochikening Drilling Fluids Containing Bentonite and Dual- Functionalized Cellulose Nanocrystals / M- C. Li, Q. Wu, T. Lei, C. Mei, X. Xu, S. Lee, J. Gwon // Energy Fuels. – 2020. – Vol. 34. – P. 8206–8215. DOI: 10.1021/acs.energyfuels.0c01192 Scholar
39.Evaluation of polymer/bentonite synergy on the properties of aqueous drilling fluids for high-temperature and high- pressure oil wells / P.C. da Camara, L.Y. Madruga, N.D. Marques, R.C. Balaban // J. Mol. Liq. – 2021. – Vol. 327. – P. 114808. DOI: 10.1016/j.molliq.2020.114808 Scholar
40.Thermoresponsive bentonite for water- based drilling fluids / W. Dong, X. Pu, Y. Ren, Y. Zhai, F. Gao, W. Xie // Materials. – 2019. – Vol. 12. – P. 2115. DOI: 10.3390/ma12132115 Scholar
41.Impact of barite and ilmenite mixture on enhancing the drilling mud weight / M. Abdou, A. Al- Sabagh, H.E.-S. Ahmed, A. Fadl // Egypt. J. Pet. – 2018. – Vol. 27. – P. 955–967. DOI: 10.1016/j.ejpe.2018.02.004 Scholar
42.Thermochemical upgrading of calcium bentonite for drilling fluid applications / M. Magzoub, M. Mahmoud, M. Nasser, I. Hussein, S. Elkattany, A. Sultan // J. Energy Res. Technol. – 2019. – Vol. 141. – P. 042902. DOI: 10.1115/1.4041843 Scholar
43.Activation of (Na, Ca)- bentonites with soda and MgO and their utilization as drilling mud / C. Karagüzel, T. Çetinel, F. Boylu, K. Cinku, M. Çelik // Appl. Clay Sci. – 2010. – Vol. 48. – P. 398–404. DOI: 10.1016/j.clay.2010.01.013 Scholar
44.Overcoming Salt Contamination of Bentonite Water- Based Drilling Fluids with Blended Dual- Functionalized Cellulose Nanocrystals / M- C. Li, Q. Wu, J. Han, C. Mei, T. Lei, S.-Y. Lee, J. Gwon // ACS Sustain. Chem. Eng. – 2020. – Vol. 8. – P. 11569–11578. DOI: 10.1021/acssuschemeng.0c02774 Scholar
45.A novel thermo- associating polymer as rheological control additive for bentonite drilling fluid in deep offshore drilling / B. Xie, A.P. Tchameni, M. Luo, J. Wen // Mater. Lett. – 2021. – Vol. 284. – P. 128914. DOI: 10.1016/j.mattel.2020.128914 Scholar
46.Ikram R., Jan B.M., Ahmad W. An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization // J. Mater. Res. Technol. – 2020. – Vol. 9. – P. 11587–11610. DOI: 10.1016/j.jmrt.2020.08.050 Scholar
47.Study of graphene oxide to stabilize shale in water- based drilling fluids / K. Wang, G. Jiang, X. Li, P.F. Luckham // Colloids Surf. A. – 2020. – Vol. 606. – P. 125457. DOI: 10.1016/j.colsurfa.2020.125457 Scholar
48.Aramendiz J., Imqam A. Water- based drilling fluid formulation using silica and graphene nanoparticles for unconventional shale applications // J. Pet. Sci. Eng. – 2019. – Vol. 179. – P. 742–749. DOI: 10.1016/j.petrol.2019.04.085 Scholar
49.Experimental investigation of the effects of silica nanoparticle on hole cleaning efficiency of water- based drilling mud / A.O. Gbadamosi, R. Junin, Y. Abdalla, A. Agi, J.O. Oseh // J. Pet. Sci. Eng. – 2019. – Vol. 172. – P. 1226–1234. DOI: 10.1016/j.petrol.2018.09.097 Scholar
50.Influence of silica nanoparticles on the functionality of water- based drilling fluids / M. Al- Yasiri, A. Awad, S. Pervaiz, D. Wen // Journal of Petroleum Science and Engineering. – 2019. – Vol. 179. – P. 504–512. DOI: https://doi.org/10.1016/j.petrol.2019.04.081 Scholar
51.Medhi S., Gupta D., Sangwai J.S. Impact of zinc oxide nanoparticles on the rheological and fluid- loss properties, and the hydraulic performance of non- damaging drilling fluid // J. Nat. Gas Sci. Eng. – 2021. – Vol. 88. – P. 103834. DOI: 10.1016/j.jngse.2021.103834 Scholar
52.Fluid filtration and rheological properties of nanoparticle additive and intercalated clay hybrid bentonite drilling fluids / M.M. Barry, Y. Jung, J.-K. Lee, T.X. Phuoc, M.K. Chyu // J. Pet. Sci. Eng. – 2015. – Vol. 127. – P. 338–346. DOI: 10.1016/j.petrol.2015.01.012 Scholar
53.Data on experimental investigation of Methyl Ester Sulphonate and nanopolystyrene for rheology improvement and filtration loss control of water- based drilling fluid / H. Elochukwu, L.K.S. Sia, R. Gholami, M.A. Hamid // Data Brief. – 2018. – Vol. 21. – P. 972–979. DOI: 10.1016/j.dib.2018.10.055 Scholar
54.Abdo J., Al- Sharji H., Hassan E. Effects of nano- sepolite on rheological properties and filtration loss of water- based drilling fluids // Surf. Interface Anal. – 2016. – Vol. 48. – P. 522–526. DOI: 10.1016/j.powtec.2020.08.053 Scholar
55.Analysis of high performing graphene oxide nanosheets based non- damaging drilling fluids through rheological measurements and CFD studies / S. Medhi, S. Chowdhury, N. Bhatt, D.K. Gupta, S. Rana, J.S. Sangwai // Powder Technol. – 2021. – Vol. 377. – P. 379–395. DOI: 10.1016/j.powtec.2020.08.053 Scholar

1.Nutskova M.V., Rudiaeva E.Iu. Obosnovanie i razrabotka tekhniko-tehnologicheskikh reshenii dlia povysheniia effektivnosti bureniia skvazhin v usloviiakh polgoshchenia promyvochnoi zhidkosti [The effect of water-swellable polymer on well drilling with mud loss]. Nedropol'zovanie, 2018, vol. 17, no. 2, pp. 104-114. DOI: 10.15593/2224-9923/2018.2.1 Scholar
2.Litvinenko V.S., Nikolaev N.I. Tekhnologicheskie zhidkosti dlia povysheniia effektivnosti stroitel'stva i ekspluatatsii neftianykh i gazovykh skvazhin [Technological fluids for increasing effectivity of construction and exploitation oil and gas wells]. Zapiski Gornogo instituta, 2011, vol. 194, 84 p. Scholar
3.Malyshkin M.M. Ekologizatsiia tekhnologii bureniia skvazhin [Well drilling technologies ecologization]. Zapiski Gornogo instituta, 2013, vol. 203, 63 p. Scholar
4.Malyshkin M.M. Snizhenie ekologicheskoi opasnosti pri vedenii burovykh rabot [Reducing environmental hazard drilling works]. Zapiski Gornogo instituta, 2014, vol. 207, 186 p. Scholar
5.Nikolaev N.I., Leusheva E.L. Razrabotka sostavov promyvochnykh zhidkosti dlia povysheniia effektivnosti bureniia tverdykh gomykh porod [Development of drilling fluids composition for efficiency increase of hard rocks drilling]. Zapiski Gornogo instituta, 2016, vol. 219, 412 p. DOI: 10.18454/pmi.2016.3.412 Scholar
6.Iakovlev A.M. Znachenie smazyvaiushchikh dokabov pri almaznom bureniia [The importance of lubricants in diamond drilling]. Zapiski Gornogo instituta, 1976, vol. 71(2), 80 p. Scholar
7.Chen C., Li C., Reniers G., Yang F. Safety and security of oil and gas pipeline transportation: A systematic analysis of research trends and future needs using WoS. J. Clean. Prod., 2021, vol. 279, 123583 p. DOI: 10.1016/j.jclepro.2020.123583 Scholar
8.Cheraghian G., Wu Q., Mostofi M., Li M.-C., Afrand M., Sangwai J.S. Effect of a novel clay/silica nanocomposite on water-based drilling fluids: Improvements in rheological and filtration properties. Colloids Surf. A, 2018, vol. 555, pp. 339-350. DOI: 10.1016/j.colsurfa.2018.06.072 Scholar
9.Medhi S., Chowdhury S., Gupta D.K., Mazumdar A. An investigation on the effects of silica and copper oxide nanoparticles on rheological and fluid loss property of drilling fluids. J. Pet. Explor. Prod. Technol., 2020, vol. 10, pp. 91-101. DOI: 10.1007/s13202-019-0721-y Scholar
10.Zheng Y., Amiri A., Polycarpou A.A. Enhancements in the tribological performance of environmentally friendly water-based drilling fluids using additives. Appl. Surf. Sci., 2020, vol. 527, 146622 p. DOI: 10.1007/s13220-019-0721-y Scholar
11.Meng X., Zhang Y., Zhou F., Chu P.K. Effects of carbon ash on rheological properties of water-based drilling fluids. J. Pet. Sci. Eng., 2012, vol. 100, pp. 1-8. DOI: 10.1016/j.petrol.2012.11.011 Scholar
12.Chang X., Sun J., Xu Z., Lv K., Dai Z., Zhang F., Huang X., Liu J. Synthesis of a novel environment-friendly filtration reducer and its application in water- based drilling fluids. Colloids Surf. A, 2019, vol. 568, pp. 284-293. DOI: 10.1016/j.colsurfa.2019.01.055 Scholar
13.Ismail A.R., Mohd N.M., Basir N.F., Oseh J.O., Ismail I., Blokor S.O. Improvement of rheological and filtration characteristics of water-based drilling fluids using naturally derived henna leaf and hibiscus leaf extracts. J. Pet. Explor. Prod. Technol., 2020, vol. 10, pp. 3541-3556. DOI: 10.1007/s13202-020-01007-y Scholar
14.V. de Oliveira, K. dos Santos Alves, A. da Silva-Junior, R. Araújo, R. Balaban Testing carrageenans with different chemical structures for water-based drilling fluid application / L. Hilliou. J. Mol. Liq., 2020, vol. 299, 112139 p. DOI: 10.1016/j.molliq.2019.112139 Scholar
15.Yang M., Luo D., Chen Y., Li G., Tang D., Meng Y. Establishing a practical method to accurately determine and manage wellbore thermal behavior in high-temperature drilling. Appl. Energy, 2019, vol. 238, pp. 1471-1483. DOI: 10.1016/j.aperenergy.2019.01.164 Scholar
16.Ahmad H.M., Kamal M.S., Al-Harthi M.A. High molecular weight copolymers as rheology modifier and fluid loss additive for water-based drilling fluids. J. Mol. Liq. 2018, vol. 252, pp. 133-143. DOI: 10.1016/j.molliq.2017.12.135 Scholar
17.Ahmadi M.A., Shadizadeh S.R., Shah K., Bahadori A. An accurate model to predict drilling fluid density at wellbore conditions. Egypt. J. Pet., 2018, vol. 27, pp. 1-10. DOI: 10.1016/j.ejpe.2016.12.002 Scholar
18.Elkatatny S. Enhancing the rheological properties of water-based drilling fluid using micronized starch. Arab. J. Sci. Eng., 2019, vol. 44, pp. 5433-5442. DOI: 10.1007/s13369-019-03720-1 Scholar
19.Basfar S., Mohamed A., Elkatatny S., Al-Majed A. A Combined Barite-Ilmenite Weighting Material to Prevent Barite Sag in Water-Based Drilling Fluid. Materials, 2019, vol. 12, 1945 p. DOI: 10.3390/ma12121945 Scholar
20.Oseh J.O., Norrdin M.M., Farooqi F., Ismail R.A., Ismail I., Gbadamosi A.O., Agi A.J. Experimental investigation of the effect of henna leaf extracts on cuttings transportation in highly deviated and horizontal wells. J. Pet. Explor. Prod. Technol., 2019, vol. 9, pp. 2387-2404. DOI: 10.1007/s13202-019-0631-z Scholar
21.Alakbari F., Elkatatny S., Kamal M.S., Mahmoud M. Optimizing the gel strength of water-based drilling fluid using clays for drilling horizontal and multi-lateral wells. SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition; OnePetro: Kuala Lumpur, Malaysia, 2018. DOI: 10.3933/applreol-28-43606 Scholar
22.Mohamed A., Al-Afnan S., Elkatatny S., Hussein I. Prevention of barite sag in water-based drilling fluids by a urea-based additive for drilling deep formations. Sustainability, 2020, vol. 12, 2719 p. DOI: 10.3390/su12072719 Scholar
23.Novriansyah A. Experimental analysis of cassava starch as a fluid loss control agent on drilling mud. Mater. Today Proc., 2021, vol. 39, pp. 1094-1098. DOI: 10.1016/j.matpr.2020.07.189 Scholar
24.Dejtaradon P., Hamidi H., Chuks M.H., Wilkinson D., Rafati R. Impact of ZnO and CuO nanoparticles on the rheological and filtration properties of waterbased drilling fluid. Colloids Surf. A, 2019, vol. 570, pp. 354-367. DOI: 10.3390/en13133417 Scholar
25.Ali M., Jarni H.H., Aftab A., Ismail A.R., Saady N.M.C., Sahito M.F., Keshavarz A., Iglauer S., Sarmadivaleh M. Nanomaterial-based drilling fluids for exploitation of unconventional reservoirs: A review. Energies, 2020, vol. 13, 3417 p. DOI: 10.3390/en13133417 Scholar
26.Bologna M., Aquino G. Deforestation and world population sustainability: A quantitative analysis. Sci. Rep., 2020, vol. 10, 7631 p. DOI: 10.1038/s41598-020-63657-6 Scholar
27.Rautela R., Arya S., Vishwakarma S., Lee J., Kim K.-H., Kumar S. E-waste management and its effects on the environment and human health. Sci. Total Environ., 2021, vol. 773, 145623 p. DOI: 10.1016/j.scitotenv.2021.145623 Scholar
28.Castillo-Gimenez J., Montanes A., Picazo-Tadeo A.J. Performance and convergence in municipal waste treatment in the European Union. Waste Manag., 2019, vol. 85, pp. 222-231. DOI: 10.1016/j.wasman.2018.12.025 Scholar
29.Demirbas A. Waste management, waste resource facilities and waste conversion processes. Energy Convers. Manag., 2011, vol. 52, pp. 1280-1287. DOI: 10.1016/j.enconman.2010.09.025 Scholar
30.Al-Hameedi A.T.T., Alkinani H.H., Dunn-Norman S., Alashwak N.A., Alshammari A.F., Alkhaimis M.M., Albazzaz H.W., Mutar R.A., Alsaba M.T. Environmental friendly drilling fluid additives: Can food waste products be used as thinners and fluid loss control agents for drilling fluid? SPE Symposium: Asia Pacific Health, Safety, Security, Environment and Social Responsibility. OnePetro: Kuala Lumpur, Malaysia, 2019. DOI: 10.2118/195410-MS Scholar
31.Majid N.F.F., Katende A., Ismail I., Sagala F., Sharif N.M., Yunus M.A.C. A comprehensive investigation on the performance of durian rind as a lost circulation material in water-based drilling mud. Petroleum, 2019, vol. 5, pp. 285-294. DOI: 10.1016/j.petlm.2018.10.004 Scholar
32.Ghayedi A., Khosravi A. Laboratory investigation of the effect of GO-ZnO nanocomposite on drilling fluid properties and its potential on H2S removal in oil reservoirs. J. Pet. Sci. Eng., 2020, vol. 184, 106684 p. DOI: 10.1016/j.petrol.2019.106684 Scholar
33.Davoodi S., SA A.R., Jamshidi S., Jahromi A.F. A novel field applicable mud formula with enhanced fluid loss properties in high pressure-high temperature well condition containing pistachio shell powder. J. Pet. Sci. Eng., 2018, vol. 162, pp. 378-385. DOI: 10.1016/j.petrol.2017.12.059 Scholar
34.Hossain M.E., Wajheeddin M. The use of grass as an environmentally friendly additive in water-based drilling fluids. Pet. Sci., 2016, vol. 13, pp. 292-303. DOI: 10.1007/s12182-016-0083-8 Scholar
35.Azizi A., Ibrahim M.S.N., Hamid K.H.K., Sauki A., Ghazali N.A., Mohd T.A.T. Agarwood waste as a new fluid loss control agent in water-based drilling fluid. Int. J. Sci. Eng., 2013, vol. 5, pp. 101-105. DOI: 10.12777/ijse.5.2.101-105 Scholar
36.Iscan A., Kok M. Effects of walnut shells on the rheological properties of water-based drilling fluids. Energy Sources Part A, 2007, vol. 29, pp. 1061-1068. DOI: 10.1080/00908310600713982 Scholar
37.Alcheikh I., Ghosh B. A comprehensive review on the advancement of non-damaging drilling fluids. Int. J. Petrochem. Res., 2017, vol. 1, pp. 61-72. DOI: 10.18689/ijpr-1000111 Scholar
38.Li M.-C., Wu Q., Lei T., Mei C., Xu X., Lee S., Gwon J. Thermothickening Drilling Fluids Containing Bentonite and Dual-Functionalized Cellulose Nanocrystals. Energy Fuels, 2020, vol. 34, pp. 8206-8215. DOI: 10.1021/acs.energyfuels.0c01192 Scholar
39.Cámara da P.C., Madruga L.Y., Marques N.d.N., Balaban R.C. Evaluation of polymer/bentonite synergy on the properties of aqueous drilling fluids for high-temperature and high-pressure oil wells. J. Mol. Liq., 2021, vol. 327, 114808 p. DOI: 10.1016/j.molliq.2020.114808 Scholar
40.Dong W., Pu X., Ren Y., Zhai Y., Gao F., Xie W. Thermoresponsive bentonite for water-based drilling fluids. Materials, 2019, vol. 12, 2115 p. DOI: 10.3390/ma12132115 Scholar
41.Abdou M., Al-Sabagh A., Ahmed H.E.-S., Fadl A. Impact of barite and ilmenite mixture on enhancing the drilling mud weight. Egypt. J. Pet., 2018, vol. 27, pp. 955-967. DOI: 10.1016/j.ejpe.2018.02.004 Scholar
42.Magzoub M., Mahmoud M., Nasser M., Hussein I., Elkattany S., Sultan A. Thermochemical upgrading of calcium bentonite for drilling fluid applications. J. Energy Res. Technol., 2019, vol. 141, 042902 p. DOI: 10.1115/1.4041843 Scholar
43.Karagüzel C., Çetinel T., Boylu F., Çinku K., Çelik M. Activation of (Na, Ca)-bentonites with soda and MgO and their utilization as drilling mud. Appl. Clay Sci., 2010, vol. 48, pp. 398-404. DOI: 10.1016/j.clay.2010.01.013 Scholar
44.Li M.-C., Wu Q., Han J., Mei C., Lei T., Lee S.-Y., Gwon J. Overcoming Salt Contamination of Bentonite Water-Based Drilling Fluids with Blended Dual-Functionalized Cellulose Nanocrystals. ACS Sustain. Chem. Eng., 2020, vol. 8, pp. 11569-11578. DOI: 10.1021/acssuschemeng.0c02774 Scholar
45.Xie B., Tchameni A.P., Luo M., Wen J. A novel thermo-associating polymer as rheological control additive for bentonite drilling fluid in deep offshore drilling. Mater. Lett., 2021, vol. 284, 128914 p. DOI: 10.1016/j.matlet.2020.128914 Scholar
46.Ikram R., Jan B.M., Ahmad W. An overview of industrial scalable production of graphene oxide and analytical approaches for synthesis and characterization. J. Mater. Res. Technol., 2020, vol. 9, pp. 11587-11610. DOI: 10.1016/j.jmrt.2020.08.050 Scholar
47.Wang K., Jiang G., Li X., Luckham P.F. Study of graphene oxide to stabilize shale in water-based drilling fluids. Colloids Surf. A, 2020, vol. 606, 125457 p. DOI: 10.1016/j.colsurfa.2020.125457 Scholar
48.Aramendiz J., Imqam A. Water-based drilling fluid formulation using silica and graphene nanoparticles for unconventional shale applications. J. Pet. Sci. Eng., 2019, vol. 179, pp. 742-749. DOI: 10.1016/j.petrol.2019.04.085 Scholar
49.Gbadamosi A.O., Junin R., Abdalla Y., Agi A., Oseh J.O. Experimental investigation of the effects of silica nanoparticle on hole cleaning efficiency of water-based drilling mud. J. Pet. Sci. Eng., 2019, vol. 172, pp. 1226-1234. DOI: 10.1016/j.petrol.2018.09.097 Scholar
50.Al-Yasiri M., Awad A., Pervaiz S., Wen D. Influence of silica nanoparticles on the functionality of water-based drilling fluids. Journal of Petroleum Science and Engineering, 2019, vol. 179, pp. 504-512. DOI: https://doi.org/10.1016/j.petrol.2019.04.081 Scholar
51.Medhi S., Gupta D., Sangwai J.S. Impact of zinc oxide nanoparticles on the rheological and fluid-loss properties, and the hydraulic performance of non-damaging drilling fluid. J. Nat. Gas Sci. Eng., 2021, vol. 88, 103834 p. DOI: 10.1016/j.jngse.2021.103834 Scholar
52.Barry M.M., Jung Y., Lee J.-K., Phuoc T.X., Chyu M.K. Fluid filtration and rheological properties of nanoparticle additive and intercalated clay hybrid bentonite drilling fluids. J. Pet. Sci. Eng., 2015, vol. 127, pp. 338-346. DOI: 10.1016/j.petrol.2015.01.012 Scholar
53.Elochukwu H., Sia L.K.S., Gholami R., Hamid M.A. Data on experimental investigation of Methyl Ester Sulphonate and nanopolystyrene for rheology improvement and filtration loss control of water-based drilling fluid. Data Brief. 2018. vol. 21, pp. 972-979. DOI: 10.1016/j.dib.2018.10.055 Scholar
54.Abdo J., Al-Sharji H., Hassan E. Effects of nano-sepiolite on rheological properties and filtration loss of water-based drilling fluids. Surf. Interface Anal., 2016, vol. 48, pp. 522-526. DOI: 10.1016/j.powtec.2020.08.053 Scholar
55.Medhi S., Chowdhury S., Bhatt N., Gupta D.K., Rana S., Sangwai J.S. Analysis of high performing graphene oxide nanosheets based non-damaging drilling fluids through rheological measurements and CFD studies. Powder Technol., 2021, vol. 377, pp. 379-395. DOI: 10.1016/j.powtec.2020.08.053 Scholar

Другие статьи выпуска

Весь выпуск (Том 23, № 1, 2023)

Скачать PDF

Информация о статье

Опубликована: 31.05.2023
В выпуске: 31.05.2023
Выпуск: Том 23, № 1 (2023)

Повышение экологичности технологических жидкостей, применяемых для бурения скважин

Аннотация

Ключевые слова

Increasing the Environmental Friendly of Process Fluids Used for Well Drilling

Keywords

Литература

Другие статьи выпуска

Информация о статье