МОДЕЛЬ УПРУГОВЯЗКОПЛАСТИЧНОСТИ ПОЛИЛАКТИДА ДЛЯ АНАЛИЗА ДЕФОРМИРОВАНИЯ КОСТНЫХ РЕШЕТЧАТЫХ СКАФФОЛДОВ НА РАЗНЫХ СТРУКТУРНЫХ УРОВНЯХ

Келлер, Илья Эрнстович; Еленская, Наталия Витальевна; Адамов, Анатолий Арсангалеевич; Виндокуров, Илья Владимирович; Ташкинов, Михаил Анатольевич

doi:10.15593/perm.mech/2025.4.08

МОДЕЛЬ УПРУГОВЯЗКОПЛАСТИЧНОСТИ ПОЛИЛАКТИДА ДЛЯ АНАЛИЗА ДЕФОРМИРОВАНИЯ КОСТНЫХ РЕШЕТЧАТЫХ СКАФФОЛДОВ НА РАЗНЫХ СТРУКТУРНЫХ УРОВНЯХ

Илья Эрнстович Келлер, Наталия Витальевна Еленская, Анатолий Арсангалеевич Адамов, Илья Владимирович Виндокуров, Михаил Анатольевич Ташкинов

Сведения об авторах

Илья Эрнстович Келлер
Пермский национальный исследовательский политехнический университет, Пермь, Российская Федерация
Наталия Витальевна Еленская
Пермский национальный исследовательский политехнический университет, Пермь, Российская Федерация
Анатолий Арсангалеевич Адамов
Институт механики сплошных сред УрО РАН, Пермь, Российская Федерация
Илья Владимирович Виндокуров
Пермский национальный исследовательский политехнический университет, Пермь, Российская Федерация
Михаил Анатольевич Ташкинов
Пермский национальный исследовательский политехнический университет, Пермь, Российская Федерация

https://doi.org/10.15593/perm.mech/2025.4.08

Решетчатые структуры из биоразлагаемых полимеров (скаффолды) используются в биомедицинских приложениях для замещения поврежденной костной ткани. Для понимания связанных деформационных и биологических процессов, происходящих в микронеоднородном материале, необходимо использование адекватной модели упруговязкопластичности материала. С этой целью предпринято экспериментальное исследование полилактида, включающего следующие программы нагружения: (а) несколько циклов одноосного стесненного сжатия с различными скоростями деформирования, (б) одноосное свободное сжатие с различными скоростями деформирования, (в) одноосное свободное сжатие по программе нагружения с циклами нагружения и разгрузки с выдержками со ступенчатыми повышением максимального напряжения, а также (г) одноосное свободное сжатие по треугольным отнулевым циклам нагружения при различных значениях максимального напряжения. Для численного исследования особенностей неоднородного распределения деформаций и напряжений при деформировании решетчатого скаффолда из полилактида сжатием в зависимости от скорости деформирования использована модель упругопластичности с законом упрочнения Джонсона – Кука, константы которой были определены экспериментально по данным испытаний (а)–(б). Обнаружено, что с увеличением деформаций сжатия образца скаффолда от 2,7 до 10,7 % начинает заметно проявляться зависимость пространственного распределения эквивалентных напряжений и скоростей деформаций от скорости деформации сжатия, приложенной к образцу, в диапазоне изменения от 1,11‧10-4 до 1,11‧10-1 с-1. Это показывает важность учета зависимости упруговязкопластических свойств полилактида от скорости деформации для корректного описания локализации пластической деформации и концентрации напряжений, влияющих на микромеханику различных физико-химических и механических процессов в скаффолдах в условиях эксплуатации. Также установлено, что использованная для описания одноосного нагружения модель упругопластичности качественно описывает поведение сплошных образцов полилактида при их нагружении: релаксацию напряжений на этапах выдержки при превышении напряжения текучести, а также накопление вязкопластических деформаций в циклах (рэтчетинг). Данные эффекты представляются важными для описания деформирования скаффолдов из полилактида в процессах отнулевого циклического нагружения с выдержками при максимальных значениях, повторяющих ходьбу человека.

Ключевые слова

полилактидкостные скаффолдыFDM-печатьмодель упруговязкопластичностирэтчетингзависимость от скорости деформацийзакон упрочнения Джонсона – Кукачисленный расчетэкспериментмикромеханика

Viscoelastic-plastic model of polylactide for analyzing deformation of bone lattice scaffolds at different structural levels

Lattice structures made from biodegradable polymers are widely used in biomedical applications to replace damaged bone tissue. To accurately capture the associated deformation and biological processes in such micro-heterogeneous materials, it is essential to employ an appropriate viscoelastic-plastic material model. To this end, an experimental investigation of polylactide was conducted, encompassing the following loading protocols: (a) multiple cycles of uniaxial confined compression at various strain rates; (b) uniaxial free compression at different strain rates; (c) uniaxial free compression with cyclic loading-unloading sequences including holds and stepwise increases in stress amplitude; and (d) uniaxial free compression under triangular zero-based cyclic loading at varying stress amplitudes. For the numerical study of spatial heterogeneity in strain and stress distributions during compression of the polylactide scaffold, dependent on strain rate, a viscoplasticity model incorporating the Johnson-Cook hardening law was employed, with model constants derived experimentally from tests (a) and (b). Results showed that as compressive strain increased from 2.7 % to 10.7 %, the spatial distribution of equivalent stresses and strain rates exhibited a clear dependence on the applied compression strain rate within the range of 1.11·10-4 to 1.11·10-1 s-1. This underscores the critical importance of accounting for strain-rate sensitivity in polylactide’s viscoelastic-plastic behavior to accurately describe the localization of plastic deformation and stress concentrations, which govern the micromechanics of various physico-chemical and mechanical processes in scaffolds during use. Furthermore, the employed viscoplasticity model qualitatively captured the key features of bulk polylactide behavior under uniaxial loading, including stress relaxation during hold phases when stress exceeds the yield limit, as well as the accumulation of viscoplastic strains in cyclic loading (ratcheting). These phenomena are especially relevant for modeling the deformation of polylactide scaffolds subjected to zero-based cyclic loading with holds at amplitude levels representative of human gait.

Keywords

Polyalctidebone scaffoldsFDM printingviscoelastic-plasticity modelratchetingstrain rate dependenceJohnson–Cook hardening lawnumerical simulationexperimentmicromechanics

Литература

1.Bioimplants for the Reconstructive Surgery and Local Delivery of Chemo-Immunoagents / N.Y. Anisimova, N.S. Martynenko, O.V Rybalchenko [et al.]. – Cham : Springer International Publishing, 2024. – P. 1–43. Scholar
2.Davison, N.L. Degradation of Biomaterials / N.L. Davison, F. Barrère-de Groot, D.W. Grijpma // Tissue Engineering. – Elsevier, 2014. – P. 177–215. Scholar
3.Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review / M.V. Kiselevskiy, N.Y. Anisimova, A.V. Kapustin [et al.] // Biomimetics. – 2023. – Vol. 8, no. 7. – P. 546. Scholar
4.Elenskaya, N. TPMS-based scaffolds: Adaptation of morphological properties and mechanical response to reference tissue / N. Elenskaya, M. Tashkinov, V.V. Silberschmidt // International Journal of Solids and Structures. – 2025. – Vol. 315, no. January. – P. 113366. Scholar
5.How does mechanical stimulus affect the coupling process of the scaffold degradation and bone formation: An in silico approach / Q. Shi, H. Shui, Q. Chen, Z.-Y. Li // Computers in Biology and Medicine. – 2020. – Vol. 117. – P. 103588. Scholar
6.Experimental Evaluation of the Effect of Degradation on the Mechanical Behavior and Morphometric Characteristics of Functionally Graded Polymer Scaffolds / N. Elenskaya, I. Vindokurov, E. Sadyrin [et al.] // Polymers. – 2024. – Vol. 16, no. 24. – P. 3474. Scholar
7.Chaboche, J.L. A review of some plasticity and viscoplasticity constitutive theories / J. L. Chaboche // International Journal of Plasticity. – 2008. – Vol. 24, no. 10. – P. 1642–1693. Scholar
8.Han, C. Evaluation of multiaxial fatigue criteria under irregular loading / C. Han, X. Chen, K.S. Kim // International Journal of Fatigue. – 2002. – Vol. 24, no. 9. – P. 913–922. Scholar
9.Abdel-Karim, M. Modified kinematic hardening rules for simulations of ratchetting / M. Abdel-Karim // International Journal of Plasticity. – 2009. – Vol. 25, no. 8. – P. 1560–1587. Scholar
10.Самарин, Ю.П. Уравнения состояния материалов со сложными реологическими свойствами / Ю.П. Самарин. – Куйбышев: Куйбышевский государственный университет, 1979. – 78 p. Scholar
11.Kletschkowski, T. Endochronic viscoplastic material models for filled PTFE / T. Kletschkowski, U. Schomburg, A. Bertram // Mechanics of Materials. – 2002. – Vol. 34, no. 12. – P. 795–808. Scholar
12.Bergström, J.S. A constitutive model for predicting the large deformation thermomechanical behavior of fluoropolymers / J.S. Bergström, L.B. Hilbert // Mechanics of Materials. – 2005. – Vol. 37, no. 8. – P. 899–913. Scholar
13.Petukhov, D.S. Selection and Identification of a Model of Elasto-Viscoplasticity of the Filled Fluorocomposite according to Free and Constrained Compression Tests / D.S. Petukhov, A.A. Adamov, I.E. Keller // Advanced Engineering Research. – 2022. – Vol. 22, no. 3. – P. 180-192. Scholar
14.Хохлов, А.В. Особенности поведения вязкоупругопластических материалов, модели и система программ квазистатических испытаний полимеров и композитов для комплексного изучения их свойств и выбора и идентификации определяющих соотношений / А.В. Хохлов // Высокомолекулярные соединения. Серия С. – 2024. – Т. 66, № 2. – P. 157–211. Scholar
15.Хохлов, А.В. Анализ общих свойств кривых ползучести при циклических ступенчатых нагружениях, порождаемых линейной теорией наследственности / А.В. Хохлов // Вестник Самарского государственного технического университета. Серия «Физико-математические науки». – 2017. – Т. 21, № 2. – P. 326–361. Scholar
16.Drozdov, A.D. Cyclic elastoplasticity of solid polymers / A.D. Drozdov, J. de C. Christiansen // Computational Materials Science. – 2008. – Vol. 42, no. 1. – P. 27–35. Scholar
17.Menčík, J. Determination of viscoelastic-plastic material parameters of biomaterials by instrumented indentation / J. Menčík, L.H. He, M.V. Swain // Journal of the Mechanical Behavior of Biomedical Materials. – 2009. – Vol. 2, no. 4. – P. 318–325. Scholar
18.Stan, F. Study of stress relaxation in polytetrafluoroethylene composites by cylindrical macroindentation / F. Stan, C. Fetecau // Composites Part B: Engineering. – 2013. – Vol. 47. – P. 298–307. Scholar
19.Stan, F. Viscoelastic characterization of polytetrafluoroethylene (PTFE) polymer by sharp indentation / F. Stan, A.V. Munteanu, C. Fetecau // AIP Conference Proceedings. – 2010. – Vol. 1315. – P. 221–226. Scholar
20.Mirkhalaf, S.M. The mechanical behavior of polylactic acid (PLA) films: fabrication, experiments and modelling / S.M. Mirkhalaf, M. Fagerström // Mechanics of Time-Dependent Materials. – 2021. – Vol. 25, no. 2. – P. 119-131. Scholar
21.Chen, X. Ratcheting behavior of PTFE under cyclic compression / X. Chen, S. Hui // Polymer Testing. – 2005. – Vol. 24, no. 7. – P. 829–833. Scholar
22.Zhang, Z. Multiaxial ratcheting behavior of PTFE at room temperature / Z. Zhang, X. Chen // Polymer Testing. – 2009. – Vol. 28, no. 3. – P. 288–295. Scholar
23.Zhang, Z. Uniaxial ratcheting behavior of polytetrafluoroethylene at elevated temperature / Z. Zhang, X. Chen, Y. Wang // Polymer Testing. – 2010. – Vol. 29, no. 3. – P. 352–357. Scholar
24.Tensile ratcheting behaviors of bronze powder filled polytetrafluoroethylene / W. Xu, H. Gao, L.L. Gao [et al.] // Frontiers of Chemical Science and Engineering. – 2013. – Vol. 7, no. 1. – P. 103–109. Scholar
25.Pruitt, L.A. Deformation, yielding, fracture and fatigue behavior of conventional and highly cross-linked ultra high molecular weight polyethylene / L.A. Pruitt // Biomaterials. – 2005. – Vol. 26, no. 8. – P. 905–915. Scholar
26.An experimental study on the ratcheting and fatigue behavior of polyacetal under uniaxial cyclic loading / M. Shariati, H. Hatami, H. Yarahmadi, H.R. Eipakchi // Materials & Design. – 2012. – Vol. 34. – P. 302–312. Scholar
27.In vitro mechanical fatigue behavior of poly-ε-capro-lactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel / J.A. Panadero, L. Vikingsson, J.L. Gomez Ribelles [et al.] // Journal of Biomedical Materials Research - Part B Applied Biomaterials. – 2015. – Vol. 103, no. 5. – P. 1037–1043. Scholar
28.An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights / C. Xi, G. Kang, F. Lu [et al.] // Materials and Design. – 2015. – Vol. 67. – P. 644–648. Scholar
29.Rigotti, D. Low-cycle fatigue behavior of flexible 3D printed thermoplastic polyurethane blends for thermal energy storage/release applications / D. Rigotti, A. Dorigato, A. Pegoretti // Journal of Applied Polymer Science. – 2021. – Vol. 138, no. 3. – P. 1–14. Scholar
30.Farrokh, B. A strain rate dependent yield criterion for isotropic polymers: Low to high rates of loading / B. Farrokh, A.S. Khan // European Journal of Mechanics, A/Solids. – 2010. – Vol. 29, no. 2. – P. 274–282. Scholar
31.Развитие циклической ползучести при блочном нагружении полукристаллического ПЭЭК / А.А. Богданов, С.В. Панин, П.С. Любутин, М.Г. Остапенко // Известия высших учебных заведений. Физика. – 2024. – Vol. 67, no. 7. – P. 68–76. Scholar
32.Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds / F.S. Senatov, K.V. Niaza, A.A. Stepashkin, S.D. Kaloshkin // Composites Part B: Engineering. – 2016. – Vol. 97. – P. 193–200. Scholar
33.The mechanical behavior of poly(lactic acid) unreinforced and nanocomposite films subjected to monotonic and fatigue loading conditions / R.D. Averett, M.L. Reaff, K. Jacob [et al.] // Journal of Composite Materials. – 2011. – Vol. 45, no. 26. – P. 2717–2726. Scholar
34.Compression of additively manufactured PLA for biomedical applications: Effects of test conditions on properties of solid samples / I. Vindokurov, Y. Pirogova, M. Tashkinov, V.V. Silberschmidt // Polymer Testing. – 2024. – Vol. 130, no. December 2023. – P. 108320. Scholar
35.Johnson, G.R. A Constitutive modeling and data for metals subjected to large strain rates and high temperatures / G.R. Johnson, W.H. Cook // Proceedings of 7th international symposium on ballistics. – 1983. Scholar
36.Triply Periodic Bicontinuous Cubic Microdomain Morphologies by Symmetries / M. Wohlgemuth, N. Yufa, J. Hoffman, E.L. Thomas // Macromolecules. – 2001. – Vol. 34, no. 17. – P. 6083–6089. Scholar
37.On strain rate and temperature dependent mechanical properties and constitutive models for additively manufactured polylactic acid (PLA) materials / J. Luo, Q. Luo, G. Zhang [et al.] // Thin-Walled Structures. – 2022. – Vol. 179, no. May. – P. 109624. Scholar
38.Rate- and temperature-dependent strain softening in solid polymers / L.C.A. van Breemen, T.A.P. Engels, E.T.J. Klompen [et al.] // Journal of Polymer Science Part B: Polymer Physics. – 2012. – Vol. 50, no. 24. – P. 1757–1771. Scholar
39.Shear yielding and crazing in dry and wet amorphous PLA at body temperature / H. Chen, Z. Pan, D. Yuan [et al.] // Polymer. – 2023. – Vol. 289. – № September. – P. 126477. Scholar
40.Identification of the Cap Model of Elastoplasticity of Non-Compact Media Under Compressive Mean Stress / A.A. Adamov, I.E. Keller, S.G. Zhilin, N.A. Bogdanova // Mechanics of Solids. – 2024. – Vol. 59, no. 4. – P. 1868–1880. Scholar
41.Understanding of trabecular-cortical transition zone: Numerical and experimental assessment of multi-morphology scaffolds / N. Elenskaya, M. Tashkinov, I. Vindokurov [et al.] // Journal of the Mechanical Behavior of Biomedical Materials. – 2023. – Vol. 147, no. August. – P. 106146. Scholar
42.Design of lattice structures for trabecular-bone scaffolds: comparative analysis of morphology and compressive mechanical behaviour / Y. Pirogova, M. Tashkinov, I. Vindokurov [et al.] // Biomechanics and Modeling in Mechanobiology. – 2025. – No. 0123456789. Scholar
43.Elenskaya, N.V. Numerical Modeling of the Deformation Behavior of Polymer Lattice Structures with a Density Gradient Based on Additive Technologies / N.V. Elenskaya, M.A. Tashkinov, V.V. Silberschmidt // Vestnik St. Petersburg University, Mathematics. – 2022. – Vol. 55, no. 4. – P. 443–452. Scholar

1.Bioimplants for the Reconstructive Surgery and Local Delivery of Chemo-Immunoagents / N. Y. Anisimova, N. S. Martynenko, O. V Rybalchenko [et al.]. – Cham : Springer International Publishing, 2024. – P. 1-43. Scholar
2.Davison, N. L. Degradation of Biomaterials / N. L. Davison, F. Barrère-de Groot, D. W. Grijpma // Tissue Engineering. – Elsevier, 2014. – P. 177-215. Scholar
3.Development of Bioactive Scaffolds for Orthopedic Applications by Designing Additively Manufactured Titanium Porous Structures: A Critical Review / M. V. Kiselevskiy, N. Y. Anisimova, A. V. Kapustin [et al.] // Biomimetics. – 2023. – Vol. 8. – № 7. – P. 546. Scholar
4.Elenskaya, N. TPMS-based scaffolds: Adaptation of morphological properties and mechanical response to reference tissue / N. Elenskaya, M. Tashkinov, V. V. Silberschmidt // International Journal of Solids and Structures. – 2025. – Vol. 315. – № January. – P. 113366. Scholar
5.How does mechanical stimulus affect the coupling process of the scaffold degradation and bone formation: An in silico approach / Q. Shi, H. Shui, Q. Chen, Z.-Y. Li // Computers in Biology and Medicine. – 2020. – Vol. 117. – P. 103588. Scholar
6.Experimental Evaluation of the Effect of Degradation on the Mechanical Behavior and Morphometric Characteristics of Functionally Graded Polymer Scaffolds / N. Elenskaya, I. Vindokurov, E. Sadyrin [et al.] // Polymers. – 2024. – Vol. 16. – № 24. – P. 3474. Scholar
7.Chaboche, J. L. A review of some plasticity and viscoplasticity constitutive theories / J. L. Chaboche // International Journal of Plasticity. – 2008. – Vol. 24. – № 10. – P. 1642-1693. Scholar
8.Han, C. Evaluation of multiaxial fatigue criteria under irregular loading / C. Han, X. Chen, K. S. Kim // International Journal of Fatigue. – 2002. – Vol. 24. – № 9. – P. 913-922. Scholar
9.Abdel-Karim, M. Modified kinematic hardening rules for simulations of ratcheting / M. Abdel-Karim // International Journal of Plasticity. – 2009. – Vol. 25. – № 8. – P. 1560-1587. Scholar
10.Samarin, Yu. P. Equations of State for Materials with Complex Rheological Properties / Yu. P. Samarin. - Kuybyshev: Kuybyshev State University, 1979. - 78 p (In Russian). Scholar
11.Kletschkowski, T. Endochronic viscoplastic material models for filled PTFE / T. Kletschkowski, U. Schomburg, A. Bertram // Mechanics of Materials. – 2002. – Vol. 34. – № 12. – P. 795-808. Scholar
12.Bergstrom, J. S. A constitutive model for predicting the large deformation thermomechanical behavior of fluoropolymers / J. S. Bergstrom, L. B. Hilbert // Mechanics of Materials. – 2005. – Vol. 37. – № 8. – P. 899-913. Scholar
13.Petukhov, D. S. Selection and Identification of a Model of Elasto-Viscoplasticity of the Filled Fluorocomposite according to Free and Constrained Compression Tests / D. S. Petukhov, A. A. Adamov, I. E. Keller // Advanced Engineering Research. – 2022. – Vol. 22. – № 3. – P. 180-192. Scholar
14.Khokhlov, A. V. The Main Features of Viscoelastoplastic Materials Behavior, Models, and the System of Quasi-static Tests for Polymers and Composites aimed at All-round Study of Their Properties and Selection and Identification of Constitutive Equations / A. V. Khokhlov // Vysokomolekularnye soedinenia. Seria C. – 2024. – Vol. 66. – № 2. – P. 157-211. (In Russian). Scholar
15.Khokhlov, A. V. Analysis of creep curves produced by the linear viscoelasticity theory under cyclic stepwise loadings. // Bulletin of Samara State Technical University Series: Physical and Mathematical Sciences / A. V. Khokhlov. – 2017. – Vol. 21. – P. 326-361. 0123456789 (In Russian). Scholar
16.Drozdov, A. D. Cyclic elastoplasticity of solid polymers / A. D. Drozdov, J. de C. Christiansen // Computational Materials Science. – 2008. – Vol. 42. – № 1. – P. 27-35. Scholar
17.Menčik, J. Determination of viscoelastic-plastic material parameters of biomaterials by instrumented indentation / J. Menčik, L. H. He, M. V. Swain // Journal of the Mechanical Behavior of Biomedical Materials. – 2009. – Vol. 2. – № 4. – P. 318-325. Scholar
18.Stan, F. Study of stress relaxation in polytetrafluoroethylene composites by cylindrical macrodentation / F. Stan, C. Fetecau // Composites Part B: Engineering. – 2013. – Vol. 47. – P. 298-307. Scholar
19.Stan, F. Viscoelastic characterization of polytetrafluoroethylene (PTFE) polymer by sharp indentation / F. Stan, A. V. Munteanu, C. Fetecau // AIP Conference Proceedings. – 2010. – Vol. 1315. – P. 221-226. Scholar
20.Mirkhalaf, S. M. The mechanical behavior of polylactic acid (PLA) films: fabrication, experiments and modelling / S. M. Mirkhalaf, M. Fagerström // Mechanics of Time-Dependent Materials. – 2021. – Vol. 25. – № 2. – P. 119-131. Scholar
21.Chen, X. Ratcheting behavior of PTFE under cyclic compression / X. Chen, S. Hui // Polymer Testing. – 2005. – Vol. 24. – № 7. – P. 829-833. Scholar
22.Zhang, Z. Multiaxial ratcheting behavior of PTFE at room temperature / Z. Zhang, X. Chen // Polymer Testing. – 2009. – Vol. 28. – № 3. – P. 288-295. Scholar
23.Zhang, Z. Uniaxial ratcheting behavior of polytetrafluoroethylene at elevated temperature / Z. Zhang, X. Chen, Y. Wang // Polymer Testing. – 2010. – Vol. 29. – № 3. – P. 352-357. Scholar
24.Tensile ratcheting behaviors of bronze powder filled polytetrafluoroethylene / W. Xu, H. Gao, L. L. Gao [et al.] // Frontiers of Chemical Science and Engineering. – 2013. – Vol. 7. – № 1. – P. 103-109. Scholar
25.Pruitt, L. A. Deformation, yielding, fracture and fatigue behavior of conventional and highly cross-linked ultra high molecular weight polyethylene / L. A. Pruitt // Biomaterials. – 2005. – Vol. 26. – № 8. – P. 905-915. Scholar
26.An experimental study on the ratcheting and fatigue behavior of polyacetal under uniaxial cyclic loading / M. Shariati, H. Hatami, H. Yarahmadi, H. R. Eipakchi // Materials & Design. – 2012. – Vol. 34. – P. 302-312. Scholar
27.In vitro mechanical fatigue behavior of poly-ecaprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel / J. A. Panadero, L. Vikingsson, J. L. Gomez Ribelles [et al.] // Journal of Biomedical Materials Research - Part B Applied Biomaterials. – 2015. – Vol. 103. – № 5. – P. 1037-1043. Scholar
28.An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights / C. Xi, G. Kang, F. Lu [et al.] // Materials and Design. – 2015. – Vol. 67. – P. 644-648. Scholar
29.Rigotti, D. Low-cycle fatigue behavior of flexible 3D printed thermoplastic polyurethane blends for thermal energy storage/release applications / D. Rigotti, A. Dorigato, A. Pegoretti // Journal of Applied Polymer Science. – 2021. – Vol. 138. – № 3. – P. 1-14. Scholar
30.Farrokh, B. A strain rate dependent yield criterion for isotropic polymers: Low to high rates of loading / B. Farrokh, A. S. Khan // European Journal of Mechanics, A/Solids. – 2010. – Vol. 29. – № 2. – P. 274-282. Scholar
31.Development of cyclic creep under block loading of semi-crystalline peek / A. A. Bogdanov, S. V. Panin, P. S. Lubutin, M. G. Ostapenko // RUSSIAN PHYSICS JOURNAL. – 2024. – Vol. 67. – № 7. – P. 68-76. Scholar
32.Low-cycle fatigue behavior of 3d-printed PLA-based porous scaffolds / F. S. Senatov, K. V. Niaza, A. A. Stepashkin, S. D. Kaloshkin // Composites Part B: Engineering. – 2016. – Vol. 97. – P. 193-200. Scholar
33.The mechanical behavior of poly(lactic acid) unreinforced and nanocomposite films subjected to monotonic and fatigue loading conditions / R. D. Averett, M. L. Reaff, K. Jacob [et al.] // Journal of Composite Materials. – 2011. – Vol. 45. – № 26. – P. 2717-2726. Scholar
34.Compression of additively manufactured PLA for biomedical applications: Effects of test conditions on properties of solid samples / I. Vindokurov, Y. Pirogova, M. Tashkinov, V. V. Silberschmidt // Polymer Testing. – 2024. – Vol. 130. – № December 2023. – P. 108320. Scholar
35.Johnson, G. R. A Constitutive modeling and data for metals subjected to large strain rates and high temperatures / G. R. Johnson, W. H. Cook // Proceedings of 7th international symposium on ballistics. – 1983. Scholar
36.Triply Periodic Bicontinuous Cubic Microdomain Morphologies by Symmetries / M. Wohlgemuth, N. Yufa, J. Hoffman, E. L. Thomas // Macromolecules. – 2001. – Vol. 34. – № 17. – P. 6083-6089. Scholar
37.On strain rate and temperature dependent mechanical properties and constitutive models for additively manufactured polylactic acid (PLA) materials / J. Luo, Q. Luo, G. Zhang [et al.] // Thin-Walled Structures. – 2022. – Vol. 179. – № May. – P. 109624. Scholar
38.Rate- and temperature-dependent strain softening in solid polymers / L. C. A. van Breemen, T. A. P. Engels, E. T. J. Klompen [et al.] // Journal of Polymer Science Part B: Polymer Physics. – 2012. – Vol. 50. – № 24. – P. 1757-1771. Scholar
39.Shear yielding and crazing in dry and wet amorphous PLA at body temperature / H. Chen, Z. Pan, D. Yuan [et al.] // Polymer. – 2023. – Vol. 289. – № September. – P. 126477. Scholar
40.Identification of the Cap Model of Elastoplasticity of Non-Compact Media Under Compressive Mean Stress / A. A. Adamov, I. E. Keller, S. G. Zhilin, N. A. Bogdanova // Mechanics of Solids. – 2024. – Vol. 59. – № 4. – P. 1868-1880. Scholar
41.Understanding of trabecular-cortical transition zone: Numerical and experimental assessment of multi-morphology scaffolds / N. Elenskaya, M. Tashkinov, I. Vindokurov [et al.] // Journal of the Mechanical Behavior of Biomedical Materials. – 2023. – Vol. 147. – № August. – P. 106146. Scholar
42.Design of lattice structures for trabecular-bone scaffolds: comparative analysis of morphology and compressive mechanical behaviour / Y. Pirogova, M. Tashkinov, I. Vindokurov [et al.] // Biomechanics and Modeling in Mechanobiology. – 2025. – № 0123456789. Scholar
43.Elenskaya, N. V. Numerical Modeling of the Deformation Behavior of Polymer Lattice Structures with a Density Gradient Based on Additive Technologies / N. V. Elenskaya, M. A. Tashkinov, V. V. Silberschmidt // Vestnik St. Petersburg University, Mathematics. – 2022. – Vol. 55. – № 4. – P. 443-452. Scholar

Другие статьи выпуска

Весь выпуск (№ 4, 2025)

Скачать PDF

Информация о статье

Опубликована: 08.12.2025
В выпуске: 08.12.2025
Выпуск: № 4 (2025)

МОДЕЛЬ УПРУГОВЯЗКОПЛАСТИЧНОСТИ ПОЛИЛАКТИДА ДЛЯ АНАЛИЗА ДЕФОРМИРОВАНИЯ КОСТНЫХ РЕШЕТЧАТЫХ СКАФФОЛДОВ НА РАЗНЫХ СТРУКТУРНЫХ УРОВНЯХ

Аннотация

Ключевые слова

Viscoelastic-plastic model of polylactide for analyzing deformation of bone lattice scaffolds at different structural levels

Keywords

Литература

Другие статьи выпуска

Информация о статье